Here is an easy guide to adjusting the Nico 4915 3D Door Hinge

Vertical Adjustment

Slacken ‘A’ screws on hinges. Adjust door to correct height and retighten screws.

Horizontal Adjustment

Partially slacken ‘B’ screws on hinge. Turn ‘C’ screw anticlockwise to move leaves apart and clockwise to bring them together. Retighten ‘B’ screws after adjustment.

NOTE: Hinges supplied set with 2mm hinge gap.

Seal Compression Adjustment

Slacken ‘B’ screws. Adjust door to correct compression on seal and retighten screws.

d4915